![]() From it you need to cut a circle whose diameter should be equal to the thickness of the spool. There is a simple and cheap way to turn a single-section spool into a two-section one. each end is wound on a certain part this type is the most effective, since the fishing line is not confused and does not sinter. both parts of the fishing line are wound together ![]() The second part can be performed in several ways: Another unpleasant moment when the grass is mowed may be the sintering of coil turns.įor various models of trimmers, a semi-automatic head is used, consisting of two parts. That is, after the head for the trimmer was installed, the user did not pull the ends of the fishing line out of the grooves. If, after hitting a semi-automatic head, the cord is not wound, then its previous winding is incorrect. Now on the market are heads with one arrow. A large amount of coiled cord threatens equipment breakdown. If there is a need to wind the line in the direction of rotation of the shaft, it rotates to a specific position. They allow you to perform rotational motion of the coil in different directions. It should be noted that the cutting head for the trimmer contains special arrows. To replace a new cord, it is necessary to remove the coil from the equipment, then unwind the old fishing line and wind a new one. The head with fishing line for this type of trimmer is manufactured by Shindaiwa and Speed-Freed. When a specific value is reached, the cord is cut off. The end of the new element is hit into the coil and then wound a certain number of times. The new cord is wound indiscriminately on the coil, that is, it does not need to be removed from the device. The trimmer head can have several ways of refueling fishing line: Further, when increasing them, the fishing line is fed automatically.įrom the foregoing, it follows that the manual mowing head for the trimmer is inconvenient. To lengthen the cord, reduce engine speed. The main feature is that the procedure occurs when the trimmer is on. Further, the cord lengthens due to centrifugal force. ![]() At the same time, a special button is pressed and the anchor mechanism opens. If you want to replace the cord, you need the trimmer head to touch the ground. To make the cord even longer, you must stop the trimmer and manually pull out the ends. In this case, the name speaks for itself, that is, the supply of fishing line occurs mechanically. The trimmer head is classified by the method of feeding the fishing line: It is a special assembled coil, inside of which there is a cord. To make the cutting process easy, you need to choose the right cutting element. If you want to improve the suburban area, then you need to choose a more powerful model. For a large plot with a flat lawn, it is better to purchase a light model with a small capacity. Before buying this equipment, you need to understand for what purpose it will be used.
0 Comments
Leave a Reply. |